Protect your engine and investment. Build-up in the fuel system will lead to many problems. Prevention is the key. Fuel additives can help.
The 2 plus 4 fuel conditioner, (from the OMC Evinrude Johnson line of fuel treatments), can help keep any 2- or 4-cycle engine free of build up.
Gasoline left sitting in your outboard engine can develop into gum deposits and varnish build-ups.
As the gum, carbon, and varnish builds up on the internal components of the engine, performance decreases, and damage to the engine can occur.
Winterizing your engine for off-season is highly recommended. Don't forget to use fuel conditioner to help keep the engine free from build-up. Draining the entire fuel system will also prevent build-up, but this is a very time consuming project - and usually unnecessary if you utilize a high quality fuel conditioner.
Treating the fuel is simple. Start with a partially filled tank, it is easy to add the amount of conditioner and stabilizer (such as the 2 plus 4 fuel conditioner) required, and fill up the tank again. Many sources recommend running the treated fuel into the engine prior to the duration of storage. Doing so can insure treated fuel reaches every part of the fuel system, and greatly decrease the risk of build up.
The Outboard Wizard stocks only genuine OMC Evinrude - Johnson 2 + 4 Fuel Conditioner.
Too much carbon in an engine, will decrease performance and engine life.
Carbon Guard, a gasoline additive, will help to decrease carbon build up and also will remove some of the existing build-up inside an engine.
It's a good idea to add genuine Evinrude Johnson carbon guard to every few tankfuls of gas.
Some people will wait to add carbon guard for as much as every 500 gallons of gas - probably too long. Remember this is an inexpensive additive and keep in mind that many manufactures, (including Evinrude/Johnson), will not honor the warranty when there is an excess of carbon build-up on the engine.
Carbon Guard works best when used in conjunction with other fuel treatments such as fogging oil and fuel conditioner. Fogging oil helps prevent rust and corrosion from condensation. Stabilizers or fuel conditioners (such as 2 plus 4 fuel conditioner) will help reduce the build-up of gum and varnish.
For trailer wheel bearings and corrosion control. Aluminum complex-based grease with excellent water shedding properties.
Protects from rust and oxidation in salt water, salt, air, water, and corrosive conditions. Highly recommended for boat trailer wheel bearings and disc brake wheel bearings. For extreme pressure applications, Universal joints, steering systems, etc.
For use in engine tune up to remove gum and varnish build-up, excessive carbon deposits from rings, pistons, valves and ports. Spray through carburetor intake of 2 and 4 cycle engines for improved performance. Not to be mixed with fuel.
Instructions (14 step procedure) and everything you need to prepare your motor for off-season storage.
For Evinrude, Johnson, Mercury and Yahaha Outboards.
Includes OMC 2+4 Fuel Conditioner/Stabilizer,OMC Storage Fogging Oil,Lower Unit Gearcase Lube,Lower Unit Gear Lube Pump,Flushing Attachment For Garden Hose,Triple Guard Grease,Can 6 in 1 Multi-purpose Lubricant,All-purpose engine Cleaner and DeGreaser, Instructions and Helpful Hints to prepare your engine for off-season storage.
VRO Pumps, Tanks, Hoses, Filters, Carburetor Kits...
Fuel Tanks, Lines, Hoses, and Components Pump Kits, Primer Bulb Assemblies, Carburetor Kits, Filters, Oil Injection Accessories, Oil Tank Kits, Tank Anchor Kits, Electric Primer Pump Kit, Filters, Gaskets, Snap Clamps...and More.